LEV testing directory and reports for the UK

The law

Hierarchy of control for hazardous substances: the UK order

The hierarchy of control ranks ways to manage exposure by their reliability and likely effectiveness. HSE says to consider eliminating the hazardous substance first, with equipment worn by individuals last.

Published 18 November 2026

options in HSE's broad hierarchy
5
the COSHH regulation that sets the order of controls
7
consider eliminating the hazardous substance
First
equipment worn by exposed individuals
Last

The short answer

HSE ranks control options by their inherent reliability and likely effectiveness. Consider elimination first, then changes to the substance, process or workplace, before controls on the process, ways of working and worn equipment.

COSHH requires employers to prevent exposure where reasonably practicable. Otherwise, they must adequately control it.

HSE's five control options

HSE describes a broad hierarchy for hazardous substances. Select each option to see what it means.

HSE's hierarchy of control options

  1. Elimination

    Remove the hazardous substance. HSE says always consider elimination first.

  2. Modification

    Change the substance, process or workplace to reduce exposure.

  3. Controls on the process

    Apply controls such as enclosures or local exhaust ventilation (LEV).

  4. Ways of working

    Use working methods that minimise exposure.

  5. Equipment worn

    Use equipment or devices worn by exposed individuals.

What COSHH regulation 7 says

Regulation 7(1) requires employers to prevent employee exposure or, where that is not reasonably practicable, adequately control it.

Regulation 7(2) puts substitution first when preventing exposure. So far as reasonably practicable, the employer avoids the hazardous substance by using a safer substance or process instead.

If prevention is not reasonably practicable, regulation 7(3) sets protection measures "in order of priority". These must suit the activity and be consistent with the risk assessment.

It lists suitable processes, systems, engineering controls, equipment and materials first. Next comes control at source, including adequate ventilation and organisational measures.

Where other means cannot achieve adequate control, suitable personal protective equipment (PPE) is provided in addition to those measures.

Principles of good practice

Schedule 2A sets out principles for controlling exposure. Regulation 7(7) says control is adequate only if these principles are applied and any workplace exposure limit is not exceeded.

  • Design and operate work to minimise release and spread.
  • Consider breathing, skin absorption and ingestion. Match controls to the health risk.
  • Choose effective, reliable controls. Add suitable PPE when other measures cannot achieve adequate control.
  • Check and review controls regularly. Inform and train employees about hazards, risks and controls.
  • Make sure new controls do not increase the overall health and safety risk.

Examples of controls

These are HSE examples. Assess the risks and suitability of a change for the work.

Examples from HSE guidance
OptionExampleSource
SubstitutionUse another substance that presents less risk, or none.HSE: substance substitution
Change the processBuy powder pre-packed so nobody needs to weigh it out.HSE: substance substitution
Process controlUse an enclosure or local exhaust ventilation.HSE: control measures
Ways of workingUse operating procedures, supervision and training.HSE: control measures

Where LEV fits

LEV is a control applied to the process. HSE says it will not usually be as reliable as changing the process, even if both could be equally effective.

An LEV hood depends on regular maintenance and people working in a way that makes it effective. Protective LEV must be maintained and thoroughly examined and tested at least every 14 months.

Some processes have shorter intervals under COSHH Schedule 4.

LEV testing
NeedWhere to look
Find an LEV testerLEV testing companies

Why PPE is last

HSE says PPE is likely to be the least reliable and effective option. It protects only the wearer, while being worn. HSE adds that its protection depends on good fit and attention to detail.

Respiratory protective equipment (RPE) is a type of PPE. Tight-fitting facepieces need a fit test to check that they fit the wearer.

Fit testing
NeedWhere to look
Find a face fit testerFace fit testing companies

Do not apply the hierarchy too rigidly

HSE warns against treating the hierarchy so rigidly that options are automatically seen as good or bad. That view can obstruct effective, reliable and workable controls.

Develop an integrated set of measures that controls exposure adequately. The right mix can include options with different levels of reliability.

The general principles of prevention

Schedule 1 of the Management of Health and Safety at Work Regulations 1999 lists general principles of prevention. These include "avoiding risks", "combating the risks at source" and "giving collective protective measures priority over individual protective measures".

Where to go next

Use these resources to assess exposure, understand controls or find a company.

Related LevHQ pages
NeedWhere to look
Understand COSHHCOSHH regulations
Record an assessmentCOSHH assessment template
Find extraction companiesDust and fume extraction companies
Find a face fit testerFace fit testing companies
Find an LEV testerLEV testing companies
Understand LEVWhat is local exhaust ventilation?
Read hazard labelsCOSHH symbols
Fire and explosion risksDSEAR explained

Check what you know

3 quick questions from this guide. Nothing you choose is saved or sent.

  1. What does HSE say to consider first?
    Show the answer

    Elimination. HSE says always consider eliminating the hazardous substance first.

  2. Where does LEV sit in HSE's hierarchy?
    Show the answer

    Controls on the process. LEV is a control applied to the process.

  3. What does HSE say about the hierarchy?
    Show the answer

    Develop an integrated set of controls. HSE warns against a rigid good-bad view and says to develop an integrated set of control measures.

Questions duty holders ask

What is the hierarchy of control?

It is an order of control options based on reliability and likely effectiveness. HSE uses it to guide choices that reduce exposure to hazardous substances.

What are the five levels of the hierarchy of control?

HSE's COSHH guidance lists elimination; modification of the substance, process or workplace; controls on the process; ways of working; and equipment worn. HSE says to consider elimination first.

Where does LEV sit in the hierarchy of control?

LEV is a control applied to the process. HSE places it below modifying the substance, process or workplace and above ways of working and worn equipment.

Is PPE the last resort under COSHH?

Regulation 7(3) requires suitable PPE alongside other measures where those measures cannot achieve adequate control. HSE says PPE should be used when all other measures are inadequate, and that it is likely to be the least reliable option.

Is the hierarchy of control a legal requirement?

COSHH regulation 7(3) sets an order of priority for protection measures when prevention is not reasonably practicable. Schedule 2A sets principles of good practice, including choosing effective and reliable controls.

Is your next test due?

Put in the date of the last test and get the deadline, with a reminder if you want one.

LEV test due date calculator

Use the directory to find an LEV tester near you.

Find LEV testing companies

Browse LEV testing companies across the UK, or choose a region.

Sources

How this guide was made: LevHQ wrote this guide from the sources listed below and checked it on 18 November 2026. AI tools helped draft and check the text.

Read next